Four-Post L&T Style Shelving is the most comprehensive shelving system of its kind. It is incredibly durable, easily accessible and attractively designed.
With its double wall construction and unique interlocking keyhole slot design, shelf supports are secured inside the wall leaving a smooth, clean appearance making this shelving ideal for Open Shelf Filing, Library Book Stacks, Heavy Duty Industrial Storage, X-Ray Filing, or various EDP Media Storage. Additionally, Pipp’s Four- Post L&T Style Shelving can be easily expanded as your business needs grow.
Materials & Workmanship
The shelving is made from only the finest materials and highest quality workmanship. The sheet metal is commercial quality steel fully pickled or equivalent.
Open uprights are formed of 18-gauge cold roll steel, rolled into a 2” wide hollow “T” or 1” wide hollow “L” shape with keyslot holes punched on 1-½” centers along the inner wall. There are no holes on the face of the post. The front and back posts are joined by welded 18-gauge 3” high spacers to maintain the required distance apart and add rigidity to the assembly. Top and bottom spacers have 11/16” stiffening flange with two ¼” holes to allow securing to the floor or mobile base. Center spacers are flat strips. All uprights 64” high or less plus uprights 76” to 88” high that are less then 30” deep have three spacers. All other uprights have four spacers. The “L” uprights are used for row ends and the “T” uprights are used as common intermediate uprights.
Closed uprights have the same specification as open uprights except the spacers are replaced by welding a 24-gauge closure sheet with a stiffener flange at the bottom of the closure sheet. The flange has two ¼” holes to allow securing to the floor or mobile base.
Shelves are formed of 22-gauge cold roll steel with 25/32” high channel formation on all sides. Return flange is formed 120° permitting easier installation. Optional Slotted Shelves have shelf divider slots punched on 2” centers. Two supports required per shelf
Shelves are formed of 18-gauge cold roll steel with 1-7/32”” high channel formation on all sides. Return flange is formed 120° permitting easier installation. Shelves available punched with divider slots or holes on 2” centers for use with X-Ray X or B type dividers. Two supports required per shelf.
Thin Shelf Support
Shelf supports are formed of hot roll pickled steel, 36” from 14-gauge and 42” & 48” from 11-gauge, 11/16” high with flat ears at either end. Semi-tubular rivets with 7/16” diameter head is staked onto ears, four rivets for each support, to set into the keyslot holes of the Open and Closed Uprights.
Heavy Shelves Support
Shelf supports are formed of 11-gauge hot roll pickled steel, 1-1/8” high with flat ears at either end. Semi-tubular rivets with 7/16” diameter head is staked onto ears, four rivets for each support, to set into the keyslot holes of the Open and Closed Uprights.
All steel parts are thoroughly cleaned in a multistage washer including the application of a phosphate coating. This results in superior paint adhesion and rust resistance. A durable baked on Powder Coat is applied for a high-quality finish. Coverage is capable of withstanding a minimum of 250 hours salt spray test per (ASTM) method number B-117 in a salt spray chamber as well as all normal resistance of a quality finish.
Sleek, Attractive Appearance
With no exposed holes on uprights
Shelves have double-bend
reinforcement on all sides.
Available in 18 and 22-gauge steel.
Baked-on enamel finish
will last for years.
Strong Steel Returns
Increase the rigidity of
Extra High Dividers
7-1/2” Dividers, adjustable on
2” centers, help to keep folders
standing in an upright position.
Thin Profile Shelf Supports
3/4” Profile allows close shelf centers
for filing, yet handles loads up to 400 lbs
Shelf covers shelf supports
for a clean, contemporary look.
Shelf supports snap into
keyhole slot design on uprights.
Numerous Shelving Options
Shelves are adjustable on
1-1/2” centers. Available with or
without divider slots, in five
widths and six depths.
Back Stop snaps into keyhole slot
on uprights with shoulder rivets
(rather than simple lances)
for added stability
Rigid framework is designed
to support mezzanine system.
Connects to Mobile Carriages
Optional single rivet shelf supports
are pre-punched to attach
to mobile carriages.
Return on bottom of upright allows shelving
unit to be anchored securely to the floor.